🛶🎣 The Best Fishing Rod Holders for Paddle Boards

Paddle board fishing rod holders are a must-have for any fan of paddle board fishing. They are designed to accommodate different fishing rod lengths and types, as well as offer easy storage when not in use.

There are many different types of fishing rods and gear that can be used on a paddle board. One of the most popular choices is using a rod holder to hold your rod securely in place while you fish. It’s important to have a good grip on your rod, so it doesn’t go flying off into the water when you get your first bite!

The rod holders we’ve reviewed here are the best of the best, no question about it! If you’re looking for a way to keep your fishing rod safe on the water and in reach all day, then these holders will do just that.

With so many options out there, it can be tough to find the right one that will work best for you. That’s why we’ve compiled a list of our top 5 favorite paddle board fishing rod holders reviewed below!

  1. Scotty Powerlock Rod Holder
  2. PLUSINNO Paddle Board Fishing Rod Holder
  3. Scotty Baitcaster/Spinning Rod Holder
  4. HITORHIKE Paddle Board Fishing Rod Holder
  5. Paddle Buddy Suction Cup Fishing Rod Holder

Our Top Overall Pick

Scotty Powerlock Rod HolderCheck Price
PLUSINNO Paddle Board Fishing Rod HolderCheck Price
Scotty Baitcaster/Spinning Rod HolderCheck Price
HITORHIKE Paddle Board Fishing Rod HolderCheck Price
Paddle Buddy Suction Cup Fishing Rod HolderCheck Price

Top 5 Best Paddle Board Fishing Rod Holders

1. Scotty Powerlock Rod Holder

The Scotty Powerlock Paddle Board Fishing Rod Holder has been designed to be the perfect rod holder for your fishing experience, no matter if you’re a seasoned angler or a complete newbie. Not only does it house and secure any size rod, but it also allows you 360 degrees of rotation so regardless of your casting direction you can easily secure your rod. Available in either side mount or deck mount options, make sure this is the last paddle board rod holder you buy by getting yours now.

With a locking ring to keep bigger rods from slipping out during transportation, the universal saddle securely clamps down on almost any rod and reel placement up to 3-inches wide. The open mounting style means you don’t have to worry about damaging your paddle board.

Buy at Amazon.com

2. PLUSINNO Paddle Board Fishing Rod Holder

The PLUSINNO Paddle Board Fishing Rod Holder is what every fisherman needs! Finally, there’s an innovative and practical way of holding your fishing rod on your paddle board. You can now easily access your rod and adjust it to the perfect position thanks to this clamp’s maximum opening size of 1.97 inch. It can accommodate a spinning, casting or spincast rod handle. Thanks to it’s 360 degree adjustable ergo-grip jaws that are strong enough to hold up under heavy force and the high impact resistant construction made from just ABS plastic material you don’t have to worry about durability. It’s also totally eco-friendly and corrosion resistant.

Buy at Amazon.com

3. Scotty Baitcaster/Spinning Rod Holder

The Scotty Baitcaster/Spinning Rod Holder has a cushioned cradle for your baitcaster reel, while the slot in front lets you hold on tightly to that spinning reel with no worries of it slipping out again. This holder also comes with an extra-long side mounted flange which leaves plenty of room for trigger grips! And don’t worry about losing any time—your rods fit right over the top strap securely so they won’t fall down when you need them most.

With this rod holder, you can securely store your baitcasting reel in one cradle while storing your spinning reel on another slot next to it or even at the bottom of the tool’s side mount flange if space permits! You’ll need no mounts as both types of reels easily fit into this storage unit with its soft latching strap that ensures all equipment stays put safely inside.

Buy at Amazon.com

4. HITORHIKE Paddle Board Fishing Rod Holder

The HITORHIKE Paddle Board Fishing Rod Holder is designed to be compatible with most fishing rod types and sizes. It can adjust 360 degrees horizontally and 90 degrees vertically so it will fit for any boat or vessel that you may own. The high impact corrosion resistant material makes this holder an eco-friendly product as well as one strong enough for long life use!

Along with the adjustable rod holder it also comes an additional mount which enables it to connect onto your boat. The clever design also means it’s an all-encompassing solution as it can fit spinning reels, fly reels, boat reels, baitcaster reels; just put this on your paddle board and get started now!

Buy at Amazon.com

5. Paddle Buddy Suction Cup Fishing Rod Holder

The Paddle Buddy will be your best buddy, as it’s the perfect way for anyone to grab their rod and reel quickly without any hassle. With a simple suction cup attachment, you’re ready to go.

Never lose your fishing rod to the depths again thanks to our suction cup mount. Attach this flexible unit anywhere you want it without the fuss of drilling holes in your boat, kayak or SUP board with these innovative multi-surface mounting discs included for free!

Attach rods securely without the need for any extra equipment while you’re out on the water. The easy grab convenience is great for paddle boarding, because it will allow you to stay hands-on at all times. With 3M foam adhesive on every corner, this 2 pack includes mounting discs that are so simple to use!

Buy at Amazon.com

Recommended Accessories

Buyer’s Guide

You have finally made the decision to purchase a paddle board, and now you need to figure out which rod holder is right for you. There are many different types of rod holders: some attach with screws, some use suction cups, and others use magnets. This article will give you all of the information that you need in order to make an informed buying decision.

It can be hard to find a rod holder that is compatible with your paddle board. You will need to take measurements from the top of the deck on your paddleboard and look up those dimensions in an online table or chart.

The first thing that you should consider when deciding which brand/model/type of fishing rod holder is right for you is where it attaches. Some people prefer screws because they provide more security while others might like suction cups because they are easier to install. Magnets are also another option if installing bolts into your boat isn’t preferable.

How do you mount fishing rod holders onto a paddle board?

Screw-Mounted – These types of rod holders are most common and involve attaching the mount to the paddle board through screws drilled into it, then fastening a fishing rod holder onto it.

Suction-Cup Mounted – These mounts attach using suction cups that are placed on either side of the paddle board; when you place them in water, they create an airtight seal between your boards and won’t move.

Magnetically Mounted – This type doesn’t require any drilling or changing out parts but instead uses magnets on both sides of the mounting bracket for attachment without damaging your paddleboard.

What type of rod holder mount would you recommend for a paddle board?

We’d recommend a suction cup mounting system. It ‘s compatible with paddle boards, it’s easy to install and remove, and the suction cups are strong enough to hold heavy fishing rods. It also won’t damage the board should you need to remove or replace the holder itself and can work well in inflatables.

How many rods can I hold on one fishing rod holder?

There really isn’t an exact answer: it depends on what type of mount you have attached as well as how big the specific mounts are themselves; some mounts come equipped with an extra slot so you can hold two rods in one mount. Generally speaking, however, you should assume that each rod holder will hold one rod each.

What kind of features does a good fishing rod holder offer?

There are many types of features and designs that rod holders can offer, so you’ll want to keep an eye out for the following points when making your purchase:

  1. The size of the holder. Will your fishing rod be able to fit in the holder itself?
  2. The weight capacity – is there a lot of wiggle room or does it have enough support to hold heavy fishing rods?
  3. How much space do I need on my board to install this product?
  4. Does it obstruct your view if mounted at a certain angle?
  5. Are there any features that come with the holder, like lure or tackle holders?

Can I mount more than one fishing rod holder on my paddle board?

It’s possible, but it may not always be as effective. If there is enough space, two rods can be installed separately from one another with both rods facing opposite directions. However, having too many holders can get crowded and limit your view or space on the board so we recommend going with just one. Make sure that all parts of the mount fit before purchasing them to avoid having to return them unnecessarily.

Can these fishing rod holders work on inflatable paddle boards?

For inflatable paddle boards you’ll generally want to stick with the suction-cup mounted rod holders. These holders are easy to install, work quite well and will not permanently damage your board if you need to remove them.

What is the best paddle board fishing rod holder?

The Scotty PowerLock is the best way to keep your fishing rods in place. No longer will you have to worry about losing a $200 rod when it falls overboard during rough waters!

It might look like it’s just a simple rod holder for your paddleboard, but if you look closely, you’ll notice that there are hidden benefits to the unit which will make a long afternoon of fishing much better.

What is the cheapest paddle board fishing rod holder?

The cheapest paddle board fishing rod holder is the Scotty Baitcaster/Spinning Rod Holder. Not only is it inexpensive, but it also boasts most of the features that can be found on the most expensive options on the market.